Safety belt is a personal protective equipment for workers working at heights to prevent falling casualties. It is praised as a life-saving belt by the majority of construction workers. Safety belt is composed of belt, rope and metal accessories, which is generally called safety belt.

The safety belt for high-altitude operation is generally processed with orange propylene belt. Safety belt is a protective equipment to prevent falling death and injury of high-altitude workers. It is composed of belt, rope and accessories. It is the general name of safety belt. It is suitable for high-altitude operations such as electrical installation and maintenance. It is suitable for external electricians, telecommunications workers, wire maintenance and other similar types of work. The safety belt has the advantages of high strength, wear resistance, durability, mildew resistance, acid and alkali resistance, simplicity and lightness. Safety belts and ropes must be made of nylon, vinylon and silk. Electrician bats can wear leather at cattle. The fittings are made of ordinary carbon steel or aluminum alloy steel. The rope wrapping thing is suitable for leather, light belt, vinylon or rubber. After the safety belt has been used for 2 years, sampling inspection shall be carried out according to the large number of purchases. The rod belt shall be used as the safety rope for static load test for impact test. If there is no crack, it shall continue to be used, and the unqualified products shall not continue to be used. Because the sampled safety rope can only be used after replacing the safety rope, pay attention to fasten the rope sleeve when replacing the new rope.

The safety belt must be checked before use. If it is found damaged, it shall be stopped from use. When wearing the safety belt, the movable clip shall be fastened and shall not touch open fire and chemicals. The safety belt needs to be kept clean frequently and stored properly after use. After soiling, it can be cleaned with warm water and soapy water and dried in the shade. It can not be soaked in hot water or burned in the sun. After one year of use, a full inspection shall be carried out, and 1% of the used parts shall be taken out for tensile test. It is qualified if all parts are free of damage or major deformation (the parts that have been taken out and tested shall not be used again).